EZ Installation Steps

Locate your central wire harness, on Sport Bikes usually found in rear or back tail section and with Cruiser center of bike near riders’ seat.

Directions:

(A). The adaptor for the motorcycle has five wires total. The Black wire is ground - Blue wire is running light - Red wire is Brake light - White wire is Right turn signal - Brown wire is Left turn signal.

(B). Now with the motorcycle adaptor Connected or Plugged In, to Your US Signaling Apparel (Jacket/Vest/Bag/etc.) And the bike keys turned to the on position simply match the corresponding wires with the color code in (A) above.
Useful Tip - The wires on the motorcycle can be identified by using your apparel like a test light, simply fasten the motorcycle adaptor’s "Black Ground wire" under a metal bolt on the frame temporarily to complete a proper electrical ground. Then follow (B) and match corresponding lights on motorcycle with corresponding lights on apparel, they will light simultaneously.

(C). It is recommended that all electrical connections be soldered for best connection.

(D). Final step, tie off or place knot so cable is anchored & left to desired length on either side of motorcycle.